Mon, Aug 02, 2021
                         gambo-motore certificazione
22'31" 9'19" 1'9" n.5 n.12 1675 lb 90 115 200 L C


For all those who see things differently from ZAR, they don't accept his fibreglass bow, but like his boat bottom, his technology and his construction quality....
New design, tubular on the bow, same ZAR boat bottom, technology and construction quality



  • 3 rows that can seat 8 persons forward running;
  • reclining driverís couch with pantograph movement;
  • driver’s couch with double position - sitting up and down;
  • front peak for the anchor with the side opening door;
  • back peak with the mooring accessories;
  • front sunbathing bed convertible into a double bed with extensions as an optional that includes dunnages and pillows, the middle dunnage with a stainless steel leg can be used as a table;
  • 160 x 195 back sunbathing bed (with back rests in the horizontal
  • position);
  • wide back peak;
  • wide front peak;
  • two-seater console with hydraulic wheelhouse, stainless steel rudder, 2 internal compartments with door and one peak under the front seat;
  • reticular polypropylene fuel tank (about 160 litres) according to standards located under the walk floor;
  • foldaway stainless steel ascent ramp and VTR bridge;
  • 4 stainless steel bollards;
  • perimetric double millpond;
  • anchor-winch nose;
  • 5 stainless steel (4 eyebolts for hangers);
  • inflating device, a pair

Technical Data

  • Static self emptying
  • Homologation “CE cat. “C”
  • Length m 6.80 (22'31")
  • Beam m 2.80 (9'19")
  • Internal walking length m 5.90 (19'36")
  • Internal walking width m 2.00 (6'56")
  • Intertubular width m 1.45 (4'76")
  • Tubular diameter cm 58 (1'9")
  • Tubular compartments n. 5
  • Seating capacity n. 12
  • Net tender weight kg 760 / 1675 lb (with standard equipment, without liquids and motor) ± 10% variable datum
  • Maximum power kW 148/HP 200
  • Minimum power kW 67/ HP 90
  • Power recommended kW 86/112
  • (average performance) CV 115/HP 150
  • Engine shaft lenght L
  • Max. weight nstallable motors kg 340 (749 lb)
  • CE certification with “C” design category and CE type testing. (A+a form).

Optional Equipment

  • Overturning stainless steel roll-bar
  • Roll-bar installation with running lights, anchorage lights, horn and wiring
  • Beacon ready installed on roll-bar/console
  • Electric panel
  • Left stern deck with folding ladder
  • Right stern deck
  • Auxiliary engine support
  • Prow sunbed extension with limber board and table legs
  • Total night cover
  • Partial night cover
  • Console cover
  • Seat cover
  • Shower Complete with surge tank, tank in prow, outdoor embarkation and installation
  • Complete dingy heuling belt kit for launch/accommodation
  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)
  • Wake board kit
  • Eletric refrigerator (12V)
  • Flexi-teak for cockpit
  • Felxi teak for the bridges
  • Flexi-teak installation
  • Nautical camping tent
  • Rear telescopic sun-cover for roll-bar
  • Side canopy(1) for telescopic sun-cover


NMMA Certified


List Main Accessories

The boatyard reserves the right to bring modifi cations to the technical features without obligation of warning.