Mon, Aug 02, 2021
                         gambo-motore certificazione
21'4" 8'4" 20¾ n.6 n.10 1990 lb 130 130/180 225 C


The natural ZAR 65 inclination for the comfort and for the open-air life was been the automatic incentive for the designers to make a special kind of ZAR, named “Suite”. For that reason all the places on board was been thought of again for fi nding a new back area for eating, talking and living all together.
The living-room suite is made with an “U” form and is able to easily receive four persons, other two persons can also stay sitting on the driver’s couch turned in front.
The table in the middle of the “U” can be quickly used for preparing, together with the extractable up part of the back seat, the same navigation back passengers seats of the ZAR 65.
So, again more comfort, again another record.
That’s the ZAR way!

  • ZAR 65 Suite XL version with transom fit for single-engine with extra-long shaft
New ZAR light-dark Gray Line A new coloration for those who don’t love the classic Black and White exceptionally offered at the same price.


  • 3 rows that can seat 8 persons forward running;
  • anchor forepeaks and afterpeaks;
  • back peak with the mooring accessories;
  • front sun bathing bed convertible into a double bed (cm 150 x 195) with extension as an optional;
  • wide stem dinette with a table as an optional;
  • wide back peak;
  • wide front peak;
  • wide back dinette with a table included (only Suite version);
  • two side peaks in the stem sides;
  • 160 x 190 back sunbathing bed (with the back rest in the horizontal position);
  • two-seater console with a hydraulic wheelhouse, stainless steel rudder, 1 internal compartment with door, an object holder and four peaks under the driver’s couch and under the front seat. Reclining driver’s couch;
  • bilge pump;
  • repairs kit;
  • inflating device;
  • a pair of paddles;
  • 8 stainless steel handles for passengers safety;
  • foldaway stainless steel ascent ramp and double VTR bridge;
  • 1 reticular polypropylene fuel tank (about 240 litres) according to standards CE;
  • 6 handling handles;
  • 4 stainless steel bollards;
  • perimetric double millpond;
  • polished stainless steel 9 Kg anchor;
  • anchor-winch nose with stainless steel bow;
  • 3 stainless steel eyebolts for hangers.
  • Dinette with a U-divan and special console with sea/chemical WC and shower fitting

Technical Data

  • Static self emptying
  • Homologation "CE cat. "C"
  • Length m 6,50 (21'4")
  • Beam m 2,55 (8'4")
  • Internal walking length m 6,40 (21')
  • Internal walking width m 2,00 (6'7")
  • Intertubular width m 1,50 (4'11")
  • Tubular diameter cm 53 (20¾")
  • Watertight compartments n. 6
  • Seating capacity n. 12
  • Net tender weight (without equipment, liquids or motor) ± 10% variable datum kg 880 (1940 lb)
  • Maximum power applicable kW 166/HP 225
  • Minimum power applicable (minimum performance) HP 85/CV115
  • Power recommended (average performance) HP 140/180
  • Engine shaft lenght L
  • on demand XL
  • Max. weight installable motors kg 400 (881 lb)
  • CE certification with “C” design category and CE type testing. (A+a form).

Optional Equipment

  • Stainless steel roll-bar
  • Roll-bar installation with running lights, anchorage lights, horn and wiring
  • Beacon ready installed on roll-bar/console
  • Sunbed extension
  • Prow complete table
  • Auxiliary engine support
  • Total night cover
  • Partial night cover
  • Console cover
  • Seat cover
  • Eletric panel
  • Left stern deck with folding ladder
  • Right stern deck
  • Shower Complete with surge tank, tank in prow, outdoor embarkation and installation
  • Complete dingy heuling belt kit for launch/accommodation
  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)
  • Wake board kit complete
  • with counterplates
  • Modification kit from Zar 65 to Zar 65 suite
  • Modification kit installation from Zar 65 to Zar 65 suite
  • Dashboard with ladder for double engine installation
  • Eletric refrigerator (12/24V)
  • Modification of the ZAR 65 driver’s seat (for boats manufactured before September 2005)
  • Flexi-teak for cockpit
  • Felxi teak for the bridges + covers (4pz)
  • Felxi teak for the bridges (2pz)
  • Flexi-teak installation
  • Nautical camping tent
  • Sunroof 3 arch
  • Rear telescopic sun-cover for roll-bar
  • Prow sunroof (rear telescopic sun-cover extension)
  • Side canopy(1) for telescopic sun-cover



NMMA Certified


List Main Accessories