Tue, May 22, 2018
Slide background
Slide background
Slide background
Slide background
Slide background

ZAR mini RIB - series

Our ZAR miniTM RIB line has different sizes and versions. All boats can be equipped with a bow locker (“L”) and a flat double flooring (“D”). All boats starting from RIB11 have a bow locker and from RIB 12 a double flooring and a bow locker as standard features. Below these sizes (RIB8,9 & 10) you can choose what you need.

As optional equipment there are steering consoles and double seating (starting from RIB9 and only with double floor). You can also choose from a variety of sunroofs, bilge pumps, cushions and many more things. Please ask your ZAR miniTM dealer. He can serve you best.

The ZAR miniTM RIB line can easily pull water toys, waterski (from25hp) and tubes with the two installed D-rings on the transom.

Every ZAR miniTM has three lifting Davit lifting points. One in the bow and two on the transom. If your ZAR miniTM has a bow locker, you will have four lifting points.

Due to the very light aluminum hull it can go very fast and plan easily with a smaller engine. The hull will not face any problems of Osmoses or gel coat defects like a fiberglass hull. It will also last longer and not become heavier during use. The aluminum hull is being specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR miniTM RIB.

All RIB inflatables from ZAR miniTM until RIB14 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.050g/m2 and a thickness of 0.9mm.

All RIB inflatables from ZAR miniTM starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2 and a thickness of 1.2mm.

All ZAR miniTM RIB inflatables are also available in CSM (formally known as HypalonTM from DuPontTM) with a special design. Please ask your ZAR miniTM dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use HypatexTM that is one on the best material on the world market today. It has been manufactured since 60 years.

All PVC seems of our ZAR miniTM tube chambers are welded*. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material’s paired with constant research & development are the key to success.

Every single ZAR miniTM inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited 2 years warranty after registering your boat with us.

With our large standard equipment and our modern Italian Design, the ZAR miniTM inflatables are one of a kind. Starting from RIB13 you will have an extra wide bow.

For all kind of watersport you can find your matching ZAR miniTM RIB. Waterskiing, cruising, SCUBA diving, fishing or as a tender to your yacht. ZAR miniTM RIB is able to satisfy your expectations.

TECHINCAL DATA

STANDARD EQUIPMENT

Standard Features RIB line                  
MODEL RIB8 RIB9 RIB10 RIB11 RIB12 RIB13 RIB14 RIB15 RIB16
Deep V bottom - - - - - - - -
Medium-V bottom -
Ultralight V floor - - - - -
Reinforced integral transom for outboard engine
5 reinforced towing bow eyes - - - - - -
Splash guard on transom
Self drainage plug
Multi-chamber buoyancy tube
Tough raised rubbing strake with splash guard
adjustable & removable ALU seat(s)
Anchor bow nose with cleat - - - -
2 Bow lifting handle
2 Rear lifting handles
Holding handles on tube
Saftey valve
Antislip pattern inside
Bi color tube with deco
Keelguard
2 oarlocks with 2 oars and oar posts - - - - -
High efficiency foot pump
Maintenance kit & User's manual
Extra wide double flooring flat inside* O O O O
Bow locker with anchor locker and fuel tank place 24l - - O
Bow locker and fuel tank place 12l O O - - - - - - -
Steering console - - - - - - O O O
Foldable steering console - - O O O O - - -
Double seat with backrest - - O O O O O O O
2 holders for fuel hose on tube - - - - - - -
CSM tube material from Hypatex (Hypalon) O O O O O O O O O
Underseat bag with soft cushion for seat O O O O O O O O O
Welded PVC tube material*
Extra Powdercoated aluminium hull - 200°C
                   
                   
                   
All standard equipment and technical data may vary without prior notice!                  
O=Optional                  
* starting from April production 2016